DI 1 Tool Control Unit
AN90129
- This DI manages 1 tool for soldering or desoldering and is fully compatible with 10 different JBC tools. Check below the complete list of compatible tools.
- The DI works with the JBC exclusive Heating System and the intelligent sleep & hibernation features to extend a tip´s life up to 5 times longer.
- Using the menu you can personalize over 20 parameters to help manage the soldering process.
- The USB connector allows to update software, create graphs and manage parameters from a PC.
- For a basic working system, you need at least 1 stand, 1 tool and 1 cartridge.
| Specifications | |
|---|---|
| Selectable Parameters | |
| Selectable Temperature | 90 to 450 ºC / 190 to 840 ºF |
| Special Features | |
|---|---|
| Sleep and Hibernation mode | These modes lower soldering tip temperature when the tool rests in the stand in order to avoid oxidation and extending tip life. |
| Max. and min. temperature | Limit the temperature range in which the operator is allowed to work. |
| Temperatue levels | Instant selection of up to 3 editable temperature settings for solder joints with different heat requirement. |
| PIN protection | Keep station parameters protected against unauthorized access. |
| Connectivity | |
|---|---|
|
USB-B (front)
|
Firmware upgrade / Software PC / Traceability
|
| Equipotential bonding |
| ESD/EOS |
|---|
| ESD safe |
| Power Supply | |
|---|---|
| Peak power | 130 W – 23.5 V |
| Voltage (AC) | ref. DI-1D – 120 V ref. DI-2D – 230 V ref. DI-9D – 100 V |
| Ambient operating temp. | 10 to 40 ºC / 50 to 104 ºF |
| Dimensions and Weight | |
|---|---|
| Control Unit | 90 x 105 x 180 mm / 2.15 kg 3.5 x 4.1 x 7.1 in / 4.74 lb |
| Package | 220 x 213 x 160 mm / 2.5 kg 8.7 x 8.4 x 6.3 in / 5.51 lb |
